How much does it cost to get started with Starlink?
Estimate the all-in cost to get a Starlink site online, from the hardware kit and shipping to the mount and cabling, the install, the accessories and the first months of service. See the upfront total, a realistic range, and what each part adds. Every number is yours to edit.
Typical range $1,342 – $2,053
- Starlink hardware kit$599
- Shipping & handling$50
- Mount & cabling$150
- Professional installation$300
- Accessories & networking$120
- First months of service$360
- Total$1,579
Recommended next steps
Some links below are affiliate links. If you buy through them, Calcatrice may earn a commission at no extra cost to you. We only suggest tools that fit your result, and a company can't pay to show up here.
$1,000 to $2,500 all-in is a mounted dish, a professional install, some networking to cover a building and a longer first run of service. Fund the setup, insure the gear and set up a real back office for the recurring bill.
What this assumes, and where it could be wrong
Every one of these is a place the number could be off. They are here because you should be able to check our working, not because we are hedging.
THE HARDWARE KIT IS THE HEADLINE, NOT THE WHOLE COST, AND EVERY NUMBER HERE IS YOURS.
The mount and cabling depend entirely on where the dish goes. A clear ground-level spot needs a simple mount and a short cable run. A rooftop or tower placement to clear trees or a taller building needs a sturdier mount, a longer weatherproofed run and often a professional to do it safely, and that is where a modest setup and an involved one part ways.
Self-install or hire it out is a real fork in the total. The kit is designed to be set up by the buyer, and many sites do exactly that for the cost of the mount alone. A tricky roof, a pole that has to clear obstructions or a run through a finished wall is where paying an installer earns its line, so set the install figure to match your placement.
The plan you choose moves the recurring number more than the hardware moves the upfront one. Residential, roam and business tiers carry different monthly costs and different priority on the network, and a business site that cannot tolerate slowdowns pays more each month. The first-months line here is sized from your own plan, and it is a recurring cost, not a one-time one.
Accessories are optional until the signal has to travel. A single room near the router needs none. Reaching a warehouse, a second floor or an outbuilding takes a mesh node, longer cable or a third-party router, and those turn a plug-and-play kit into a small network. Budget them if the whole site has to be covered, not just the corner the dish sits in.